Results 1 to 7 of 7

Thread: Oil Burner Questions

  1. #1

    Oil Burner Questions

    So a few weekends ago I got the roof over my foundry and blacksmith section of my shop fixed and I wanna see if I can get an oil burner working, it's only been about 10 to 12 years since I first started it, now I hope to finally finish it and get back to pounding red hot iron and melting and pouring molten metal

    Here's where I'm at, years ago my neighbor gave me the oil burner that once heated his house, it did work when I first got it but life happened and I wasn't ever able to get it together and the oil pump doesn't work now, I've had my big forge finished for quite a while now, so now it's time to get the oil burner working, I plan to use waste motor oil thinned with kerosene if possible, I need to buy a new oil pump, that's where my question is, I have found several just like I originally had on this burner, then I searched for a waste oil burner pump and found a couple that look very similar to what I already have, I have a book that shows what all the number and letters are for on the oil pumps, but I'd like to get someone else to let me know what they think and if it could work
    Below is a picture of my burner and pump, the letters and numbers on my pump are A2VA-7116



    I found an oil pump on ebay just like it, then I found another "waste oil pump" with these letters and numbers on it A2RA-7710
    Here is what the letters and number mean on the pumps
    A - Series, they are both Single Stage
    2 - motor Speed, they are both 3450 RPM
    R - Strainer, The R = 30 x 30 mesh, I haven't been able to find out what the mesh size is for the "V" but I'm working on it
    A - Motor Rotation and Nozzle Location, They are both the same

    The only difference is this
    77 - 54 mm Hub Lip Seal
    10 - Mounting Style and Standard Pumps

    My pump is
    71 -
    16 -

    I can't seem to find what the 7116 means verses the 7710, If they are close I'm sure I can get one to fit the other since I have a machine shop

    Tomorrow I'm going to call a friend of mine who owns a heating and cooling company to see if he knows anything about oil burner pumps
    I'm also going to call Bryant heating and cooling since they service and sell Suntec oil pumps

    Until then if anyone knows anything about them I would greatly appreciate any help you can give me
    Thanks again for any help


    Ron
    If ya cant cast it, Forge it RSS

    http://metalmaster1766.webs.com/

  2. #2
    Well.. the good news is that pump is only about 70bucks for a new one. I see 3 GPH.... That's a bit high you know right?? Ya need something around 1gph

    - - - Updated - - -

    Service manual http://www.suntecpumps.com/PDFs/Inst...e%20Manual.pdf
    WWW.TheHomeFoundry.org
    https://www.youtube.com/user/jagboy69
    Visit me: WWW.HandcraftedLanterns.com
    "Sometimes by losing a battle you find a new way to win the war"
    -- Donald Trump --

  3. #3
    Moderator DavidF's Avatar
    Join Date
    Jan 2012
    Location
    Wilmington DE
    Posts
    2,628
    Quote Originally Posted by jagboy69 View Post
    Well.. the good news is that pump is only about 70bucks for a new one. I see 3 GPH.... That's a bit high you know right?? Ya need something around 1gph

    - - - Updated - - -

    Service manual http://www.suntecpumps.com/PDFs/Inst...e%20Manual.pdf
    Thats typically their highest rating on the pumps flow, the actual consumption/output can be changed by the nozzle up to the max gph of the pump.
    A calm sea does not make a skilled sailor...
    http://thehomefoundry.org

  4. #4
    I'm not to worried about GPH since I know I can adjust that other ways, I did find out that I should be able to use the waste oil pump on my burner, that's my main concern. I have plenty of used motor oil to use and I can get more whenever I want it

    I'll just be happy to get back into casting and forging

    Thanks for the replies, I'll be sure and keep ya's updated once I get a new oil pump and get busy

    Ron
    If ya cant cast it, Forge it RSS

    http://metalmaster1766.webs.com/

  5. #5
    Cool, let's see it running.
    WWW.TheHomeFoundry.org
    https://www.youtube.com/user/jagboy69
    Visit me: WWW.HandcraftedLanterns.com
    "Sometimes by losing a battle you find a new way to win the war"
    -- Donald Trump --

  6. #6
    I know this is a different direction, but if you have lots of use motor oil, you might be interested in siphon nozzle type burners. I build a very nice burner system using the air pump out of a torpedo type heater and the nozzle from it. Instead of cutting the oil with kerosene, I use a modified coffee urn to preheat and thin the oil. I have not done a complete write up on it yet, but here is a video of it when I poured iron. https://www.youtube.com/watch?v=XnN22pMpt4o&t=130s

    For the price of the new oil burner pumps and all those other parts, you might be able to pick up a heater off craigslist and that's mostly all you need.
    Use those coffee makers with the spout out the bottom to preheat you oil!

    My foundry: http://www.alloyavenue.com/vb/album.php?albumid=1

    My waste oil burner:http://www.youtube.com/watch?v=NwpKCsiWKls
    Metal casting video:http://www.youtube.com/watch?v=8ui24..._order&list=UL

    My website : maniacmechanics.blogspot.com

  7. #7
    Just out of curiosity, have you had the pump apart to check the internal filter mesh? I've had the one on my home furnace apart multiple times, every few years the strainer inside the housing with the 4 bolts on it gunks up. It can be cleaned pretty easily with carburetor cleaner.
    Vade Libram Harenae.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •