rotarysmp

Need some flat plate. Made my own.

Rate this Entry
I need some 6mm flat stock to make the motor mounts for my little CNC gantry Mill, so I decided to cast some.



I got heavy shrinkage...



Luckily the pouring spout was long.



The outlet riser was wrongly positioned, as there is some shinkage around it. I'll just chop that bit off and put it back into the ingot pile.
Tags: None Add / Edit Tags
Categories
Uncategorized

Comments

  1. metalshop's Avatar
    Looks like it should work fine though. I made a similar one to mount the battery isolator on my work truck.
  2. GypsyTinker's Avatar
    right on, I'd love to see what you do with it.
  3. rotarysmp's Avatar
    http://www.cnczone.com/forums/bencht...ng_mill-2.html here is the first bit made from it.